|
INKS & SUPPLIES |
Inks for Self-Inkers & Pre-ink Mounts
Ink for Self-Inking Mounts:
Availble in Black, Blue, Red, Green, Purple or Brown Ink.
2 oz. bottle • $3.95
ORDER
Ink for u•mark self-inking mounts
 How to reink your self-inking stamp:
Push the top of the unit down approximately 1/8".
Push the buttons (located on each side) inward to lock
the unit in place.Push
the pad out from either side. Replace the old pad or
apply Maxum ink to the face of the old pad. Allow 5
minutes to soak in and insert back into the self-inker.
Press down on the top of the unit and the locks release
automatically.
For best results use Ideal
Ink only.
Other types of ink may damage your stamp.
Self-inking mounts are perfect for many
applications.
These sturdy plastic devices are ergonomically designed
to fit comfortably in your hand. The type of paper
the impression is made on will determine it's drying
time. Your stamp is not intended for use with glossy
paper.
|
|
Ink for Pre-Inked Mounts
Availble in Black, Blue, Red, Green, Purple, or Brown Ink.
1/4 oz. bottle • $5.00
ORDER
Ink for i•stamp pre-inked mounts
 How to reink your pre-inked stamp:
Remove the handle and place the required amout of
ink in the ink ports. Sizes do vary, so the amount of
ink is determined by the size/model number. Divide
the quantity of drops between the two ink ports.For
ink amounts, see below. Let the stamp sit overnight. If
the impression is still too light, repeat. Always reink
with the same color as the original stamps. Leave stamp
in upright position after inking.
For Models 75, 325 = 3-4
Drops
115, 125, 145 = 4-6 Drops
185 = 6-8 Drops • 245 = 10-12 Drops
For best results use i-stamp preink
Ink only.
Other types of ink may damage your stamp.
Other points to consider about
a pre-inked stamp:
-
The type of paper
the impression is made on will determine it's drying
time. Your stamp is not intended for use with glossy
paper.
-
The dust cover
allows you to keep your stamp clean when not in use.
If the surface of the stamp does get dirty, place cellophane
tape directly on the stamp surface and remove. The tape
will remove the loose particles and enable the stamp
to make better impressions.
-
If you get ink
on your fingers, use rubbing alcohol and then soap and
water.
-
To avoid stains,
keep away from clothing.
-
Keep your pre-ink
stamp away from children
|
Return to
Inks & Supplies
|
|
Popular Styles!
click image for info!
|
